Your cart is empty.
Your cart is empty.Product Description
180° flex
The head angle can be adjusted to a maximum of 180 ° ,Handle has high hardness and large torque, which can be applied to more narrow and harsh environments compared with the straight handle
Adjustable angle
When the ordinary wrench is used on the flat surface, the finger cannot reach under the wrench. This wrench is more convenient to grasp and use the force on the flat surface
Robust and durable
Made of high-quality chrome-vanadium steel, with good toughness and long service life. There are different sizes of wrenches for you to choose from, you can choose according to your needs
It is suitable for the repair and maintenance of bike or car parts.
It is applicable to the installation and repair of parts of large machines.
It is applicable to the maintenance of household appliances.
Customer
Reviewed in the United States on March 6, 2025
The ratcheting part of the wrench broke the first time I used it. Almost had to cut my nox sensor wire to get it off but managed to.
David Witty
Reviewed in the United States on March 4, 2025
I Love These Kind Of Wrenches
Morgan Williams
Reviewed in Canada on July 24, 2024
Used this wrench for a few seconds, the open end ratchet system fell apart immediately
Johannnes M.
Reviewed in Germany on March 19, 2024
Schlechte verarbeitung für diesen preisRatsche ist schon 2 mal auseinandergefallen!!!!Sehr anfällig für Schmutz
Dr Pots
Reviewed in the United States on February 2, 2024
The way the open end ratchet is set up you have to be very lucky with being able to slide the open end over the nut/bolt and having access to rotate the end to line up. For instance, I was trying to use this to separate brake lines by sliding the open end over the line to then get to the banjo bolt. This proved impossible as then there was not enough room to rotate the ratchet to slide over the nut. Would be better if it was 12 point not 6 point. The open end is also thicker and wider than a standard wrench reducing its application even further.
Pangea
Reviewed in Canada on December 17, 2024
This tools serves a purpose for me with a very large nut holding a car dipstick tube in place on a vintage car. Very difficult to access, the wrench allowed the nut to be loosened and tightened properly. Kind of like a huge size brake bleeder wrench with an articulating and ratchet head,I gave it four stars as I am not sure how robust the open ratchet mechanism will prove to be, but my use will not require high torque.
Mark in Malvern
Reviewed in the United States on November 3, 2024
I purchased the 21mm for faucet installation/repairs. The head was simply too big to when the water lines are also installed. Otherwise, it appears to be of good quality.
Gennaro M.
Reviewed in the United States on November 18, 2024
Used this to replace the two power steering lines on my 2011 Outback that went from the pump to the steering rack. I would not have been able to do the job without it honestly.
Fitzgerald
Reviewed in Canada on November 13, 2024
It works but for only light duty jobs
Jay R
Reviewed in the United States on November 1, 2024
I bought this specifically to use for replacing the multi brake line cramped toyota prius abs pump swap... While I wish this tool was cheaper it certainly made that part of the repair a lot easier and faster. the abs swap is quite job... note, I did not use this to break the lines free though they were not that tight as they get very little corrosion. I would not use this for breaking free a rusted wheel cylinder or break bleeder and really for those jobs you don't need this. unless I do another prius abs pump I probably wont use this again. that said, having to do a total of 10 or 12 lines all right next to each other I am so glad I did not have to do 10 thousand 1/4 turns with an open end wrench.
robert locklin jr
Reviewed in the United States on October 13, 2024
this tool really helps in tight places thanks
DZLDON
Reviewed in Canada on April 4, 2024
As described very good 7
Logan
Reviewed in the United States on April 21, 2024
Bought this to remove automotive o2 sensors. Co-worker has a tool truck version of this wrench. That version is longer and 3x the price. But this shorter wrench has helped in tighter spots! The ratchet mechanism looks identical to the tool truck brand and if this breaks, I’m assuming I can get repair parts. So far, no issues with the tool, but like all things, (especially being a ratchet wrench used to break away o2 sensors) it will break.
Recommended Products