Your cart is empty.
Your cart is empty.Product Description
Wide range of compatibility
Compatible Models : WM2455HG, WM2050CW, WM2677HWM, WM2501HWA, WM2688HNMA, WM2801HLA, WM0642HW, WM2496HWM, WM2487HWMA, WM2901HVA, WM2701HV, WM2301HW, WM2487HRM, WD12430RDG, WD12526BDM, WD13513BDA, WD12526BDM, WD12433BDA, F1355FDS5 etc.
MBF618448 Washer Rotor Hub Assembly
High quality replacement parts
- Diameter: 4" Metal Splines
- The center is made of metal
- Compatible with Kenmore, LG etc.
Package Quantity
1 X MBF618448 Washer Rotor Hub Assembly
Solves common problems
- Washer won't spin properly
- Washer won't agitate properly
- Excessive noise from washing machine
Made of high quality materials for durability and easy installation
The hub center of the rotor is made of metal
Please refer to the manual before ordering to ensure that the correct and compatible parts are ordered.
cheedo71
Reviewed in the United States on March 31, 2025
Fit my lg wm3001hra alright.. as others stated it is a bit thinner than original. Lucky the center hub section was slightly too wide to fit fully in the drum therefore giving it good tooth engagement.
linda relford
Reviewed in the United States on February 8, 2025
The washer repair was both cost-effective and straightforward. The replacement part was a perfect fit.
Tricia Simonson
Reviewed in the United States on April 21, 2025
Worked perfectly! Looked up on utube how to install part properly. Saved us a lot of money!
Customer
Reviewed in the United States on September 2, 2024
This replacement disc fixed the problem on my washing machine drum not turning. It was a very easy replacement. Seems to be working just fine. It saved me quite a bit of money over hiring a repairman.
Nathan King
Reviewed in the United States on July 28, 2024
Like other reviews state, this is thinner than the original part. I have model LG WM2101HW.From my measurements you need a spacer about 0.195 inches thick. 2, 1 x 1-1/2 x 14GA and 1, 7/8 x 1-3/8 x 18GA added up to about 0.208 inches.
Sarah
Reviewed in the United States on May 3, 2024
The spline fits on the shaft but the crown of the replacement part is ~4mm too short. This causes the rotor assembly to slide too far onto the shaft keeping the retaining bolt from contacting the bottom of the replacement part. Even after tightening the retaining bolt, the rotor slides front to back. Fortunately I had some 1mm sheet metal and made four spacers I inserted on the crown side of the shaft. This allowed the bolt to secure the rotor to the shaft.
brad
Reviewed in Canada on March 17, 2024
Part did not work for my wm2301hr as it is manufactured too thin. Which means it does not tighten. May not be an issue for other models but as reviews have said there is possibly a solution by using a washer to take up that space. Should not be listed for this model and more than likely others.
Mike Cormier
Reviewed in Canada on February 4, 2024
Item was a great inexpensive fix to the problem. Thanks
Kev-K
Reviewed in Canada on February 18, 2024
Installed on my 11 year old washing machine, bolt up to rotor assembly was good but had to file the splines a bit for a solid fit as there was still metal interfering with the shaft install.
Luis
Reviewed in Mexico on October 16, 2024
Excelente justo de allí
Sean Manning
Reviewed in the United States on January 9, 2024
Good price and quality product
Paula S.
Reviewed in the United States on October 25, 2023
Recommended Products
$31.99
$ 14 .99 $14.99
$33.50
$ 16 .99 $16.99