Your cart is empty.
Your cart is empty. 1. material:Silicone
2. Frequency: 125 KHz
3. Diameter: 60mm for adult
4. feather:waterproof,rewritable chip
5. Package included: 5 PCS waterpoof Writable rewrite 125khz duplicator silicone rfid T5577 wristband
6. Working Mode: Read-write modes - Can be used in 125KHz RFID card Copier/ Duplicator
7. Storage Capacity: 330 bit (264 free bit availability)
8. Reading distance is 0 - 10cm OEM Service: Logo printing.
Package include: 5pcs waterpoof Writable rewrite 125khz duplicator silicone rfid T5577 wristband
Bob O' Bourdon
Reviewed in Sweden on August 26, 2024
Even if the reader I have, actually confirmed they were programmed with 125khz (T5577) frequency I could NOT program them with my own 125khz codes that I have in my home. 101% Rubbish.
mohammed abdelrahman
Reviewed in the United Arab Emirates on December 30, 2024
The item is not working (nfc tag)
Edward
Reviewed in the United States on October 25, 2024
Cloned a few HID badges with my Flipper Zero, all of them work.
Customer
Reviewed in the United Kingdom on October 12, 2024
Work exactly as expected, seem to be reliable too, great for small wrists however may be a little tight on larger wrists!
Lillymama
Reviewed in the United States on April 28, 2024
So far I wrote my card onto one and it works. Hopefully the next 4 will be just as good
me
Reviewed in the United States on April 22, 2024
These bands are great for small hands/wrists. Three men tried it on and each man struggled to get it on and was tight on their wrist.
Todd R. Goddard
Reviewed in the United States on November 18, 2023
Unable to program it to open doors.
Hawkeye
Reviewed in the United States on June 22, 2022
These worked as described, but one of the bands was not detected by the Proxmark3 I was using to write to them. No matter how many times I tried, or how I held the band to the Proxmark, it just wasn't detected.UPDATE: I was able to get the 5th band working after a bit of troubleshooting. I used the following command with my Proxmark3 to recover the band to a functional state:lf t55xx write b 0 d 000880E8 p 00000000
Jack Schutte
Reviewed in the United States on January 11, 2022
Was unable to program with Keysy. Did not work. Went in the trash.
Nash
Reviewed in Australia on November 3, 2021
Working exellent, good value for money.
Rickcrew
Reviewed in the United States on September 7, 2019
Please know what you are doing before leaving a bad review on something. If you are going to copy RFID cards know what type you are trying to copy before leaving a bad review because you ordered the wrong thing. T5577 is good for IO Prox, Indala, EM, HID 1326 (ProxCard II), AWIA, as well as a few others. It does not work with Mifare or all types of HID. Do your research before buying something. When you leave a bad review because you thought all RFID cards were the same it hurts everyone that shops that market.Fits a full grown mans wrist easily. Very durable, so great for technicians or anyone that gets their hands dirty. The applications are endless if you want to keep an access key on you at all times without the risk of losing it, this is the ticket. Completely waterproof (I even shower with it on) and seriously would have expected this thing to have broken or fell apart by now but it has held up great.Reading distances can be reduced a little and may require near contact to have it read, but it has been dependable and has always scanned consistently with the access reader.If you are programming with a Proxmark 3 make sure you place it over the correct antenna when writing. The rubber is thick and can be a challenge to get it to write at a distance.
Rob Rob
Reviewed in the United States on September 6, 2018
Works perfectly with my building’s security (Datawatch Systems) HID readers. It also works at my apartment’s readers. For the ones that say the bracelets are not read with their readers. Please be advise that you need to program the bracelets first. The bracelets’ rfid chip is blank. Like most write/rewrite chips, you need to assign a number first. If you present a new bracelet to a reader, it will not transmit anything because once again, the chip is blank and must be first programmed.Please reach out if you need help with programming.RL
Michael Maki
Reviewed in Canada on July 8, 2018
A ok
Recommended Products