Shopping Cart

Your cart is empty.

Your cart is empty.

X AUTOHAUX 12580426 Fuel Injector for Chevy Silverado for GMC Sierra 1500 2500 3500 HD 2002-2006 for Chevy Suburban 1500 Tahoe for GMC Yukon XL 1500 2002-2006 5.3L 6.0L

Free shipping on orders over $29.99

$22.99

$ 11 .99 $11.99

In Stock

About this item

  • The Replacement Part Number(OE Number): 195500-4581, 12580426, 217-1626
  • Fit for GMC Sierra 1500 4.3L 5.3L 6.0L Base, Denali, SLE, SLT, WT 02-05 for GMC Sierra 2500 HD 6.0L /6.6L Diesel/ 8.1L SLE, SLT, WT 03-06 for GMC Sierra 3500 SLE, SLT, WT 6.0L /6.6L Diesel/ 8.1L 04-06 for Chevy Silverado 1500 LS, LT, SS, WT 4.3L 5.3L 6.0L 03-06 for Chevy Silverado 2500 HD LS, LT, WT 6.0L/6.6L Diesel/8.1L 03-06 for Chevy Silverado 3500 LS, LT 6.0L/6.6L Diesel/8.1L 02-06 for Chevy Suburban 1500 LS, LT 5.3L 02-06 for Chevy Tahoe LS, LT, Z71 5.3L 03-06.
  • Fuel injector enables fast start up in cold environments; direct replacement of your old or broken injector, and no modification needed.
  • Package Included: 1 x Fuel Injector; Material: Metal and Plastic; Pin Number: 2; Voltage: DC 12V; Orifice Type: 4 Holes Disc, Flow Rate at 43.5psi/3 bar, 29.9Lb/hr, 226G/min, 314.2cc/min
  • Notice: This is a non-OEM product, accessory only! Please make sure that the OE number and make/model/year/trim are the same as your product before buying!



Product Description

Fuel Injector

Description:

  • Durable product, convenient to installation.
  • Great replace your old or broken fuel injector.
  • Promoted smooth engine operation and balanced fuel delivery reducing overall fuel consumption and harmful emissions.
  • This is non OEM product.Accessory Only!

Specification:

  • OE Number:12580426
  • Color:Black
  • Material:ABS
  • Size:62x16x33mm/2.44"x0.63"x1.30"(L*W*H)
  • Pin Number:2
  • Voltage: DC 12V

Package Include:

  • 1 x Fuel Injector

Note:

This installation should be done by an experienced mechanic who has access to a factory service manual and all required tools!

Please check the fitment section of this listing before you bid.

Please kindly check again your engine volume!

This is a non-OEM product, accessory only!

Installation Steps

Fitment:

  • for GMC Sierra 1500 4.3L 5.3L 6.0L Base, Denali, SLE, SLT, WT 02-05
  • for GMC Sierra 2500 HD 6.0L /6.6L Diesel/ 8.1L SLE, SLT, WT 03-06
  • for GMC Sierra 3500 SLE, SLT, WT 6.0L /6.6L Diesel/ 8.1L 04-06
  • for Chevy Silverado 1500 LS, LT, SS, WT 4.3L 5.3L 6.0L 03-06
  • for Chevy Silverado 2500 HD LS, LT, WT 6.0L/6.6L Diesel/8.1L 03-06
  • for Chevy Silverado 3500 LS, LT 6.0L/6.6L Diesel/8.1L 02-06
  • for Chevy Suburban 1500 LS, LT 5.3L 02-06
  • for Chevy Tahoe LS, LT, Z71 5.3L 03-06
  • for GMC Yukon Denali, SLE, SLT 5.3L 6.0L 02-06
  • for GMC Yukon XL 1500 Denali, SLE, SLT 5.3L 6.0L 02-06
  • for Cadillac Escalade Base 6.0L 02-06
  • for Cadillac Escalade EXT Base 6.0L 02-06
  • for Cadillac Escalade ESV Base 6.0L 03-06

Installation:

Step 1: The metal rod over the fuel injectors is the fuel rail. Use the socket and ratchet to remove the bolts and brackets holding the fuel rail in place.

Step 2: Make sure the engine is cold enough to touch. Disconnect the battery.Remove plastic engine covers using appropriate socket. Set covers aside.

Step 3: Use pliers to disconnect the electrical connector on each injector.

Step 4: Lift the fuel rail off of the intake manifold, bringing the injectors with it.

Step 5: Examine the injector. If you see a small metal clip that looks like a staple, use a small flathead screwdriver to remove or depress the clip. Then grasp the injector and work back and forth while pulling to remove from the fuel rail. The injector and rail will drip, so have shop towels ready.

Step 6: Press the injector into the rail until it stops. Attach the metal clip, if equipped. Reattach the fuel rail. Line up all the injectors over their respective holes, then press each injector until they slide into place.

Step 7: Bolt down fuel rail. Reattach fuel line. Plug in fuel injector electrical connections. Reconnect battery.

Step 8: Turn the key to the on position and wait 10 seconds then check all the injectors for fuel leaks before turning to engine start. After the engine drops to the normal idle RPM, turn the engine off. Check all the injectors for fuel leaks again.


DT
Reviewed in the United States on February 14, 2022
Bottom retaining cap and o ring fell of and into my motor while attempting to install, no getting them back. had to go to local auto house to get a new one. hope my motor doesn't get damaged.
Recommended Products

$70.78

$ 30 .99 $30.99

4.4
Select Option

$30.77

$ 13 .99 $13.99

4.7
Select Option