Your cart is empty.
Your cart is empty.Product Description
Here at SWAG our Press Brakes are built for individuals looking for quality, 100% American made tools. Designed for those working with a limited budget and the need for custom metal fabrication.
Product evolution and expansion has led us to Several different sizes and models of Brakes designed to meet a wide variety of needs. From our smallest, with a bending width of 13.50", to our Mammoth 50" Universal Finger Press Brake DIY Builder Kit with a total bending width of 49"! We strive to keep the needs of the everyday working man or Saturday shop hound at the forefront of our minds.
SWAG Off Road
- Innovative
- Unique
- Authentic
- Efficient
- Integral
- Honorable
We believe in our Motto "Doing Ordinary Extraordinary!"
Since our inception, we have a long history of Service. We believe in doing business the old fashioned way; we actually answer our Phone!
___________________________________ Available Press Brake Accessories: __________________________________
Machined Arbor Press Plates (Pair)
Cut out of high strength grade 50-A572 steel plate. These arbor press plates are sold as a pair and are designed to replace the junk cast arbor plates that are prone to shattering under heavy load. Every SWAG arbor press plate is machined on both sides to remove mill scale and sharp edges.
We currently offer 4 different sizes of arbor plates
8.50'' X 10.00'' X 1.50'' Are the Ideal size for factory replacement of the 20 ton Harbor Freight cast arbor plates. The low cost cast arbor plates that are typical provided with hydraulic presses, often fail under shock loading.
SWAG Digtal Angle & Level Gauge
Take the guesswork out of bending sheet metal on your SWAG press bake kits.
Just set the unit on a flat reference surface, press the ZERO button to calibrate the display then attach it to the metal you are forming and precisely bend sheet metal to the desired angle.
The Angle Cube offers 0.2 degree accuracy with a resolution of 0.05 degrees at a range of 90 degrees. The large LCD screen makes it easy to read while strong magnets hold the unit to any steel or cast iron surface. Spare battery included, measures 2 3/8 Inch x 2 3/8 Inch x 1 3/8 Inch.
"FLAT TOP" Adjustable Bottom V Die
This simple concept allows you to easily adjust the gap between the bottom V die, by loosening two 5/16" bolts and siding the 3/8" thick laser cut plates in or out. This will allow for tighter bends on thinner materials and or allow you to bend much shorter pieces of material than what is currently offered with the SWAG standard or heavy duty press brake kits.
The bottom steel plate has 4 threaded 5/16" holes and is laser cut out of 5/8" thick steel which sits upon the bottom die of the SWAG 20 ton press brake kits. The "Flat Top" is a self contained unit and can be removed or slid into position with in a few seconds.
Mychael Williams
Reviewed in the United States on November 2, 2021
I liked the construction of the product; unfortunately I purchased the incorrect type. I didn't know that the company had a finger press and I returned the item.I will order the finger press at a later date.
Pete G
Reviewed in the United States on January 8, 2021
Great quality product , fantastic little project weld together kit ..you get a top quality press brake once you've welded it all together .. just take your time especially pay attention to the two guide rods that they are square to the base . It works a great creates crisp shape bends . SWAG tooling is high quality, well thought out designs ..thanks guys
Customer
Reviewed in the United States on February 2, 2019
Easy to weld great press
Steve
Reviewed in the United States on December 28, 2019
WAS EASY TO ASSEMBLE. WELDED AND HAD IT WORKING WITH IN A 1hr. I BOUGHT A AIR OVER HYDRAULIC 20 TON JACK . MAKES IT EASY TO USE. GOOD INSTRUCTIONS. I AM A WELDER BY TRADE IS WHY I BOUGHT THE KIT. IF YOU DON'T HAVE WELDING EXPERIENCE, YOU MAY WANT TO BUY THE WELDED ASSEMBLY .
Samuel Rothschild
Reviewed in the United States on June 28, 2016
Works Awesome
Phil of all trades
Reviewed in the United States on May 23, 2016
so far it's awesome. easy to weld together and bends great
Customer
Reviewed in the United States on November 8, 2016
Awesome
Lance Rainey
Reviewed in the United States on November 26, 2016
easy to use
Recommended Products