Your cart is empty.
Your cart is empty.Product Description
Front & Rear Fender Liners
3-piece Construction
3-piece construction provides total protection and keeps mud and debris out of the engine bay
Paintable Logo Plate
The front liner features a removable and paintable logo plate!
Long-Lasting Durability
Each liner features a corrosion-resistant black powder coat for long-lasting durability.
Aftermarket fenders are a huge improvement for most Jeeps wanting to get the best clearance and articulation possible, but when removing the stock fenders many people also remove the stock fender liners. Regain protection in this crucial area and protect your engine bay from the elements with Rough Country’s innovative Front and Rear Inner Fender Liners. With a unique 3-piece construction, these liners cover more areas than other liners on the market, giving more protection to your engine bay and body panels. Each Rough Country liner features a corrosion-resistant powder coat for long-lasting durability. Additionally, these liners mount firmly to the body for quiet operation, free of rattling or vibration noise.
The solid-steel, angular design with “RC” and “Rough Country” logo cutouts gives an aggressive look to this now more visible area on your JK. An included, removable logo plate for the front liner can be custom painted to any color you wish for a pop of extra color, while the rear liner lines up perfectly to show the painted body color behind it. Rough Country Inner Fender Liners feature a bolt-on installation process with minor drilling for an easy upgrade you can do with common tools in a home garage.
Installation & Technical Notes
Rough Country Fender Liners feature a bolt-on installation process with minor drilling for an easy upgrade you can do with common tools in a home garage.
Technical Notes
- Requires minor drilling and grinding
- Uses OE hole locations
- Works with Rough Country Tube Fenders
- May require modification to work with aftermarket / OE fenders
Vehicle Fitment
Jeep
- 2007-2018 4WD Wrangler JK
- 2007-2018 4WD/2WD Wrangler Unlimited JK
Robert L.
Reviewed in the United States on June 4, 2025
It was nice to buy a product that looks as good as the pictures and fits perfectly. Follow the directions and you will have no issues. The jeep I bought already had the Rough Country tube steel fenders. The previous owner has just cut up the plastic inner fender liners. Now it looks really good.
Dave
Reviewed in the United States on March 23, 2025
Bought these in October 24. Finally had time to put them on. When I opened the box I noticed the box was short the DS rear center piece. Very frustrating considering I started with the front inners and then got to the rear and was short. Hoping someone reaches out and makes this right and sends me the piece I was shorted. Other than that they went on pretty smoothly. I would watch the drill bit size they tell you to use. It’s quite big and causes issues later. Go smaller!
Heath Aidan Schall
Reviewed in the United States on April 28, 2025
Love the look. Happy with the quality. Has a little fitment issues, not a big deal. They do rattle on the back ones when you hit a bump. You can only hear it with the windows up. Still working on fixing that.
Customer
Reviewed in the United States on August 22, 2024
Fit perfect, looks good, was a fun project. Takes 2 to 3 hrs to put on. Make sure you have the right rivet gun. You will need a rivet nut tool with the correct tip.
Christopher J Rayner
Reviewed in the United States on December 29, 2024
Once installed (requiring a drill and some creativity) they fit. A secret for getting a blind nut started - put a mechanics latex glove on and glue the nut to your finger with super glue - it's the only way you'll get a few of the fasteners that go through stock holes started. Once they are in, they're fine.
Kindle Customer
Reviewed in the United States on November 5, 2024
Great look Great fit. One bracket came in two rights no left. I called rough country direct and they were wonderful to deal with. Within about eight minutes they had the correct part on the way and i received it in less than 48 hours.
Calvin Holland
Reviewed in Canada on July 22, 2022
Hardware for installation lists what is supplied and needed too install...but hardware just missing from the bags
Deborah
Reviewed in the United States on November 3, 2019
2010 jeep jku .On the rear rt. Side , instructions said drill holes. I did not! I used a inner lock nut on the inner far corner back, toward bumper.And clips on the other 2 holes, toward center and front. On that front clip you will need a longer bolt. That sucks it up into alignment for your corner holes. Rear lt. Side the same as rt. except I used a short bolt, and lock nut far corner toward bumper. DUE TO YOUR GAS LINE IS THERE EXT. do not drill!!!. Front inners went on pretty easily except were door panel and inner space is for that crease pc. I had to use 1/4 in. Taping screws. Due to the brackets have know way to bolt on . So I placed the brackets holes over the screw rivets , that hold my fender flairs on , then drilled on the front side through the brackets ,then screwed in the taping screws. They look amazing. But beware of the instructions.
Jen Waldrop
Reviewed in the United States on February 20, 2018
I purchased the front and rear fender liners for my 2013 JKU. 3 stars is the best I can do. Other reviews stated chipped paint, absolutely zero issues with paint. Others also stated missing hardware, extra hardware was included but not enough washers.PROS:They look great on my Jeep with the Smitty Built low profile fenders.Compared to other brands the cost is great.No interferences with any parts.CONS: (Quite a few)I consider myself very handy but these took me about 6 hours to install.Back center tab/fastener hole on front fender off by 1” and I had to cut it off to reattach the fender to this hole. Picture showing this. At least the other two fasteners were there.Back most fastener hole on rear fender off below the body by 1/2”. No other fastener locations so I’ll have to drill a new hole in the fender liner to attach. Because of this the fender liners rattle with every bump. It’s a Jeep.. it picks up every bump so sounds like crap.Had to go out to buy extra washers.The instructions and photos were useless. Due to the many pieces it is trial and error putting it all together.With this kind of craftsmanship I will not be buying any Rough Country products for my Jeep in the future. It would have been worth paying twice the amount for better liners. You get what you pay for.
Recommended Products