Your cart is empty.
Your cart is empty.Product Description
Package Content:
Wind Turbine x 1
Blades x 5
Controller x 1
Nose Cone x 1
Set Screws and Nuts x 1
Installation Notes x 1
Anemometer x 1（no battery）
Note:Without tower tube
(We recommend：steel pipes or iron pipes, diameter :50±2mm)
- 1. For Home Use
- 2. For Monitoring Use
- 3. For Boat / Marine Use
- 4. For Wind Solar
- Hybrid Streetlight Use And More
Specifications:
Rated power:400 W
Maximum power:410 W
Number of blades:5
Rated voltage:12 V
Start-up wind speed:2.5 m/s
Rated wind speed :13 m/s
Working speed:3-25 m/s
Survival wind speed:40 m/s
- Blade Material: Nylon Fiber
- Generator Type: 3-Phase AC Permanent Magnet Generator
- Braking Method: Electromagnetic
- Wind Direction Adjustment: Automatically Adjust The Windward Angle
- Operating Temperature: -40 ~ 80 ℃
- Magnetic Material: Neodymium Iron Boron
- Cabin Material: Die Casting Aluminum Alloy
High efficiency
1. Three-phase permanent magnet synchronous motor. Efficient and compact ac generator with high performance NdFeB permanent magnet.
2. An intelligent wind charge controller can shut down auto when the battery is fully charged.
Which can adjust current and voltage effectively.
3. The unique magnetic circuit design makes the starting torque very small, which can effectively ensure the wind turbine's breeze starting ability.
High quality
1.The wind turbine is made entirely of high quality aluminum and stainless steel fittings. It is not only lightweight, small in size, but also compact in shape.
2.The blade material is made of high-strength plastic with 30% carbon fiber and anti-UV anti-corrosion material, which is both beautiful and durable.
3.The surface of the wind turbine is coated with a special process that provides excellent resistance to oxidation and corrosion under any harsh conditions, as well as excellent corrosion resistance, water resistance and sand resistance.
Easy installation
1.Take out the wind turbine, put the wind turbine on the tower and align it with the flange hole. Mount the four flat gaskets on the four bolts, then insert the bolts into the holes corresponding to the flange. Tightening the screws by hex key.
2.The three wires of the wind turbine are connected to the transmission cable, each pair of wires is not less than 30 mm, and the tape at the connection end is at 100 mm.
3.Connect the wind turbine's cable to the controller and the battery must be connected to the controller before wiring.
Feature:
1. Wind Turbine starting with low speed; high wind energy utilization; beautiful appearance; low vibration on operation.
2. Wind generator Blade adopt reinforced fiber nylon which more durable and strong ability of Anti-wind. With optimized aerodynamic shape and structural design, has a High wind energy utilization.
3. Our wind turbine adopting patented permanent magnet rotor alternator, with a special kind of stator design, decrease resistance torque of the generators efficiently.
4. Being installed by human design and easy for installation, maintenance and repair.
Dan
Reviewed in the United States on August 9, 2024
The product is good, sturdy and easy to assemble. Mounting it on a pole was quite daunting because one has to have a solid base. The blades rotate nicely and generate power. I bought 400 watts Li-ion batteries, red-black #12 gauge wire to connect from the turbine to batteries. Connected the batteries to 400 watt inverter to run the devices.Have contacted the customer service/support and was prompt and responsive with providing help by answering questions.
Jane Black
Reviewed in the United States on December 6, 2024
The media could not be loaded.
Customer
Reviewed in Canada on July 17, 2023
Je l'ai installé, mais ne vante pas ça ira a plus tard pour un commentaire
Steve R
Reviewed in the United States on March 6, 2023
This turbine has supplemented my solar enough to nearly eliminate the need for my backup generator to be run.... Without appliances or television. The initial charge controller never worked, however, customer service sent a replacement very quickly.I am unsure about the amount of charge being received, and given the charging capabilities, This is definitely not a primary charging option. Wind that charges at 5-20 amps, over maybe 5-15 minutes, really will not provide much of a charge at all. However, 24 hours (or a couple hours)of high winds has the capability to charge very nicely.
Curtis A.
Reviewed in the United States on January 21, 2023
Pros-windmill well constructed, works as expected Cons; you will need to have a pole welded to the mounting flange. This set me back another $50 for the weld (in addition to the heavy duty pole/pipe. The unit came with a defective charge controller which had the brake on always(I have seen this in other reviews. The seller quickly replaced and it is functioning fine now. The seller is obviously a ESL speaker and it was difficult to communicate but they responded VERY quickly.
Charlie Brown
Reviewed in Canada on April 17, 2023
I will update further down and tell you about power production at various wind speeds. Let you know the actual. So, update, 25.6kmh wind is producing 67w. Correction 20 km/h consistently is 60w output.
Gbls
Reviewed in the United States on December 12, 2022
Sturdy construction, relatively easy to assemble, (the base mount requires welding though). Not too loud in high wind, but it produces almost no power. The best I was able to get out of this in the highest winds, was only 23Watts. I even swiped its own controller with a Renogy MPPT and the output was the same. WHAT A WASTE!
Pierre Bernier
Reviewed in Canada on November 22, 2022
Meilleure que la 3palles courant plus stable
Ellison Belt
Reviewed in the United States on April 26, 2022
Great product so far. I installed this on my sailboat at the very stern. I had the base welded to an iron pipe ($20 weld). I also added an additional 2" of fiberglass over the deck 12" around the base of the pole (4" total), then ran a single 8' iron pipe all the way through the deck, bolted through with top and bottom flanges. Then ran 4 guy wires from 6' up the pole to the deck. Once the pole was installed, installing the turbine was easy. I'm using the turbine to charge a 2-battery bank in parallel and a 3000W inverter. Consistent power draw with VHF's, stereo, bilge pumps, a 2.5 cubic ft fridge, phone chargers, etc.......is 200-300W. In 10MPH winds or higher, the turbine provides enough charge to maintain battery charge. Lower than that, I can cycle the inverter off and maintain. I intend to add 600W in solar panels to the turbine soon.
Rolly
Reviewed in Canada on April 14, 2022
I was very excited to try a wind turbine. Set it up and honestly it didn't deliver what was advertised. On a very windy day the volts were 15.5 so I was happy. One day I come into my shop and I hear a hauling from outside. I check the voltage and nothing is there.One day before I could return it so that made me happy at least. So now I know that wind turbines aren't the greatest. Waste of time and money.
BPM
Reviewed in the United States on March 7, 2021
The media could not be loaded.
Joshua Rusin
Reviewed in Canada on October 15, 2021
The set up is simple especially with the right pole.
Sean
Reviewed in the United States on April 16, 2021
It is well made product. Fairly easy to assemble with the exception of figuring out what type of pole setup you'll do. Real output will not be 400 continuous watts. It has to be perfect when conditions and power will generate as long as wind keeps going. In my setup it's additional on top of solar.
Recommended Products