Your cart is empty.
Your cart is empty.The Kuryakyn 4071 Mini Arms for Ergo II, in Chrome. Use this item to customize your foot peg placement. Includes (2) Chrome Mini Arms for Ergo II. The Kuryakyn 4071 Mini Arms for Ergo II are custom fit for use with multiple motorcycles using: Kuryakyn Ergo II Cruise Mounts (excludes Ergo II with LED Cruise Boards and Ergo II Cruise Boards).
James Lynch
Reviewed in the United States on April 15, 2025
Would not fit! My fault. Should have read the ad more carefully. Returned item for refund.
David S.
Reviewed in the United States on October 19, 2022
For long legged people, these work perfectly.
Kevin R Neuhaus
Reviewed in the United States on July 8, 2021
I'm 6'7" so needed to make some readjustments to where the highway pegs were located on my Goldwing. This worked like a charm. Pushed them out and forward enough that my legs didn't have to bend around the faring and the my knees are no longer in the way of the bars.
Customer
Reviewed in Canada on September 12, 2019
Returned the first order as they look used and were scratched. Replacement arrived and were almost the same. Look like factory seconds re chromedThese do not fit the ergo 2 LED foot boards either, would require a different size bolt not included in this package
ray collier
Reviewed in the United States on July 9, 2019
I bought my Goldwing from a guy that lived ten miles from the Florida coast.. I had to replace most of the Kuryakyn chrome pieces because the chrome flaked off. I just replace the foot peg arms and pads and they look nice. The foot peg mounts are a little flaky, but not that much to notice unless you look real close. My Harley's have excellent chrome on them and would be banned from the parking lot if it had flaky chrome.
Speedy
Reviewed in the United States on July 6, 2019
Replaced the stock 6" arms with a set of the mini-arms on my 2004 Goldwing. I'm 6' 3" and neither the 6" or 4.5" arms accommodate tall riders. These make things much more comfortable for taller riders. I mounted them pointing straight forward and they work great for me. The offset from the standard straight arms is also great as it positions your legs a little more outward allowing more clearance between your legs and the fairing.I ride fairly aggressive and in the straight forward position I did scrape the outer edge of the foot pegs in somewhat aggressive cornering. So, in the corners you'll want to leave them folded up. However if you mounted them more upright, you'd have better clearance. But when folded up, they offered plenty of clearance. I'll leave mine in the straight forward pointing position as this is most comfortable for me.Note you will need a larger hex head wrench to mount the foot pegs as the included new bolt uses a 3/8" hex wrench. I mention this as I had the new mini-arms shipped to a location for a return trip. I'd taken an 8mm hex wrench with me that fit the stock mounting bolts. But wasn't able to mount the foot pegs and had to make a quick trip to the hardware store.The quality is outstanding and chrome job excellent. Wish I'd have swapped them out many miles ago.
Wayne C Heidelberg
Reviewed in the United States on December 31, 2019
Great fit.
Client d'
Reviewed in Canada on January 20, 2018
Fit perfectly with my ergo 2 floorboards.
Robert A.
Reviewed in the United States on October 10, 2016
These 2" arms are exactly what I needed for my Kuryakyn highway pegs to get me legs in the correct position. I was not aware that when you buy the original highway pegs from Kuryakyn, you can order them with 6" or these 2" arms. My dealer ordered the highway pegs for me, and he ordered them with the 6" arms. The 6" arms are only good if you are very short of very tall. If you are between 5' 8"/5' 9" and 6' 3"/6' 4", then you need these short 2" arms. If you are shorter than 5' 8"/5' 9", or taller than 6' 3"/6' 4", then you may want the longer 6" arms. To complicate things, there is a third length available from Kuryakyn. It is 4" in length, but the 4" arms are not an option when you buy the highway pegs. If you want/need the 4" arms you have to buy them separately. Wish I had know all of this when I first bought the highway pegs, I could have saved some money. Good luck.
Joseph Jolly
Reviewed in the United States on October 3, 2013
I have a GL1800 and bought these to replace the straight arms on my Kury highway pegs. The straight arms never worked for me (5'9", 32 inseam) and I reluctantly purchased these because I was pretty unhappy with the straight Kury set-up. These arms worked pretty well for me and dont drag the ground in the twisties (when folded up). Before you spend 300 bucks on another highway peg set up I would recommend giving these a try.
Recommended Products
