Your cart is empty.
Your cart is empty.Product Description
Dustin
Reviewed in the United States on May 25, 2025
Buyer beware. A simple hand tighten of this screw caused it to crack. This has got to be the cheapest metal possible. I've used tin foil stronger than this garbage. Do not buy, the internal parts are interchangeable. The gasket is not.
DunkBp
Reviewed in the United States on February 19, 2025
Everything was right
Snooky11
Reviewed in the United States on April 28, 2023
Just what I needed
John R
Reviewed in the United States on April 11, 2023
Purchased for a bing 14. The float needle was slightly longer than the original it replaced so I had to bend the float bracket. The float bowl gasket is rubber vs paper which is nice, but it's too thick. The threads on the bowl cannot engage and so now I have to buy a standalone gasket
efrain barajas
Reviewed in the United States on January 8, 2022
Swapped some bing parts over to this one but saw no issues with this carburetor.Works as intended
Gumersindo
Reviewed in Spain on March 23, 2021
Vai ben.e medio chino pero pa moto de 49cc valelle ben ke despois vou vendela e se lle falla o Kia compre ke lle Dean no cu.porke se meto un Bo despois aike pedir mais pola moto e non ai a Ken lla vender.entonces con 20€ arregléi.o ke a compre despois se lle reventa ke gaste os cartos.o caso e Ter EU na vulsa o diñeiro
BethRazz
Reviewed in the United States on December 13, 2021
Put this on a 1978 puch newport. carburetor will work, but you have to make it work. The float bowl on mine was machined crooked where the gasket seals so i had to use my old bowl. Also the jet is one piece so you have to swap out the old one or you will never be able to tune it. I also had to turn the idle screw in all the way to get it to idle. The float bowl gasket immidiately swelled up and was ruined by the gas. This is all funny because the same brand rebuild kit actually has better parts in it All in all it did add power, more acceleration. but it wasn't really worth the effort as i had to ruin my throttle cable and the jetting is still off..
Crystal stark
Reviewed in Canada on January 13, 2021
Fast Delivery Good Prices. You get what you order
Step1979
Reviewed in the United States on October 29, 2020
These are good enough to throw on IF you use your old parts . Float, float needle, main spring, choke and main jet are fine. You may need to alter the main jet to the proper size by drilling to the correct size, or resuse your old main jet/tube. The main jet and tube on these are one piece, so no changing the jet only. Since Bing made so many different needles , slides, and idle screws , you MAY need to use those older parts as I had to for the best outcome. Some may be able to use these as is, but keep in mind, swapping parts may be a real possibility to make these work well. My slide had become stuck in the old carb, and no soaking in various solvents would get it to free up, so I had to force it out, and in doing so, damaged the carb body at the top screw cap area. This carb allowed me to assemble a nice working carb when all done.
Kunde
Reviewed in Germany on January 27, 2020
Ich wollte schon immer mal einen dieser Nachbauvergaser testen, hatte aber bis dato entweder zuviel Angst, vorallem aufgrund alteingesessener Meinungen, oder noch nen originalen Bing irgendwo rumfliegen. Nun ist es dann passiert, ich habe mir eine Zündapp 444 ohne Vergaser gekauft.. Zuhause nur noch einen Mikuni liegen gehabt, welcher nicht im Ansatz richtig bedüst, noch richtig dimensioniert ist. Also auf Amazon diesen Vergaser gefunden, und da sowieso mein Gehalt kam direkt bestellt.Als der Vergaser ankam war ich zunächst überrascht, wie wertig sich das Teil anfühlt, und wie schön sich alle Hebel (Choke und Pumpe) betätigen lassen. War jedoch vorsichtig, weil ich erstmal schauen wollte, ob noch überschüssige Spähne in dem Gehäuse rumfliegen. Hab jedoch, außer einem Überguss an einem der Punkten, wo das Alu in die Gussform eingelassen wird, nichts gefunden. Auch der Stift, der den Schwimmer in Position hält, lässt sich leicht entfernen. Dann habe ich den Düsenstock ausgebaut, und siehe da; die originalen Bing. Düsen passen genau. Nach dem Einbau und Testen des Vergasers kann ich diesen ohne Bedenken weiterempfehlen! Vorallem, wenn man auf der Suche nach einem originalen Bing nicht findig wird. Das einzige, was ich jedoch abändern würde, ist die Feder, welche den Gasschieber vorspannt. Diese hat meiner Meinung nach zu viel Spannung. Hier vielleicht einfach eine von einem alten Vergaser nehmen, wenn man noch eine rumfliegen hat.
Georgina
Reviewed in the United Kingdom on August 9, 2019
Rubbish rubbish rubbishLeaks like my ex missis after all my mates have been round. Whilst I’m at work i shall add 😂I want my money back £18 is £18 and that’s my £18
Philippe c.
Reviewed in the United States on August 8, 2019
Good value for an obsolete moped part.
Schulte M.
Reviewed in Germany on February 18, 2018
Super Nachbau - Vergaser. Tolle Qualität, und die Originalen Düsen mit 3,5 mm passen sogar.Billiger kommt man an solche Vergaser nicht mehr ran.....
Recommended Products
$41.99
$ 21 .99 $21.99