Your cart is empty.
Your cart is empty.Product Description
Dimensions:
- Intake Diameter inner Diameter: 36mm (1.42 inch)
- Air Filter Mount inner Diameter: 46mm (1.81 inch)
- Air Filter Mount Outer Diameter: 50mm (1.97 inch)
Interchange Part Number:
4WU-14901-00-00
Fitment:
- for Yamaha Big Bear 350 YFM350FW 4X4 1997
- for Yamaha Big Bear 350 YFM350FW 4X4 1998
- for Yamaha Big Bear 350 YFM350FW 4X4 1999
Package Includes:
- 1x Carburetor
- 1x O-Ring
- 1x Throttle Base Cover
- 6x Base Cover Screw
- 1x FREE Inline Fuel Filter
Horace Yates
Reviewed in the United States on March 5, 2025
Order the correct part.Carbs are set up differently for specific applications. All ports and linkage are In the same place when the new carb gets there.
Morgan Fawver
Reviewed in the United States on April 1, 2025
When you get it, you will need to rebuild it. I would not buy again.
Serge alain
Reviewed in Canada on June 23, 2024
J'avais un problème deCarburateur très difficile à ajusterMaintenant c'est réglé il va très bien
Bruno Nantel
Reviewed in Canada on May 4, 2024
Il n’est pas identique malgré le même #, il a fallu faire une modification du côté Intake puisqu’il n’y avait pas le même raccord. Le câble de l’accélérateur est trop long puisque ce n’est pas le même raccordement que l’original.
Customer
Reviewed in the United States on March 18, 2024
Had to put in bigger jets so I had to pull off several times to get it to run just OK not like the original
Louis
Reviewed in Canada on April 16, 2024
Le carburateur ne fait pas sur le Yamaha Big Bear 350 1999. Impossible de le fixer en place.
Michel B.
Reviewed in Canada on June 19, 2023
works like it was meant to be , just so little adjustement
Tommy Smith
Reviewed in the United States on January 31, 2022
What I needed
Bruce
Reviewed in Canada on February 7, 2021
1999 Big Bear YFM350FWBL. Was changing the jets etc on my original Mikuni carb and broke the casing at the pilot jet. Bought this one and it would not work properly, swapped out my OEM jets into this carb body and now runs like the day I goter.. this carb had slightly bigger jets. Still a good deal but be aware of the jet sizes.Was an exact fit as well, completely.
Billy M
Reviewed in the United States on November 30, 2020
Picture helped to match replacement part.
Customer
Reviewed in the United States on October 12, 2020
Pleasantly surprised with this carburetor. My Dads 1997 Yamaha Big Bear 4X4 ATV had been sitting in storage for 7 years. We flushed and changed all fluids, incl. gas tank and all new filters, spark plug, battery. The existing Carb was past any help of a rebuild, just fully gunked up. We bolted on this new Carb and the ATV started right up. We were both amazed. Carb is working great. ATV doesnt like the choke on too long after it gets started, just about 20 seconds or so. Some minor adjustments with idle screw are needed, otherwise works great. Rode ATV for hours after install with no issues. NOTE THOUGH: we had to pull off new Carb elbow for throttle cable insert into throttle cable housing on new Carb. New Carb throttle cable elbow was about 1/2 inch shorter than original and was too short to be adjusted. Easy fix tho.
Robert G.
Reviewed in the United States on January 19, 2020
Thank you the great product you produced best price and great value and an awesome rebuilt carb
christy
Reviewed in the United States on June 20, 2018
Item was exactly what my husband needed. It came quickly and at a great price.
Recommended Products
$28.99
$ 13 .99 $13.99