Your cart is empty.
Your cart is empty.Product Description
Specifications
- Tire Diameter: 12"
- Tire Material: Rubber
- Wheel Arms Material: Aluminum Alloy
The rubber boat transom launching wheel makes you propel a boat through various rough surfaces with ease.
12" Inflatable Boat Wheels
- Aluminum Alloy Frame Wheel Arms
- 2 Pairs of Quick Released Pins
- Durable Rubber Wheels
- Large Load Capacity
Easy to Install
Simply assemble the arm and wheel and drill 4 holes in the crossframe. You can attach the arm sets to the transom.
Mike Warren Mahler
Reviewed in the United States on June 9, 2023
These are a nice set of wheels for our inflatable raft. There was a minimal set of instructions that came with the wheels. I would clamp and test fit before actually drilling the transom to install the brackets. The pins that were provided were not what were shown in the ad but a trip to the hardware store fixed the issue. All in all I am fairly pleased.
Jayberz
Reviewed in the United States on May 6, 2023
I've got a 10 foot inflatable boat with an aluminum floor and a beach access in my neighborhood. Though the boat is technically "portable" the last time I tried to carry it down to the water I almost threw my back out. These transom wheels have been an absolute game changer! Here’s what I like and don’t like about these transom wheels:****************************************************LIKES*Effective - There's not a lot to the design of these things. They've got a U-channel with two pins that hold another aluminum stick with the wheel on it to it in place. Your move one of the pins so that we all arm can pivot up and down and use the other pin to lock it in place. In the down position the wheels roll easily over sand and rough terrain (though they do struggle a bit in deep soft sand) once you get the belt floating in the water you can easily remove a pin and flip them back into that position for storage. They're awesome.*Simple Install- you have to do to mount these in place is mark the position that you want them in (Make sure you put the boat on saw horses or keep it up off the ground so you can test the height of the wheels in both the up and down position and make sure you have enough clearance). Once you know where you want them you just drill a couple holes and use the included hardware to bolt them in place. You also have to make sure you mount them wide enough so they don't interfere with your motor if you have one mounted to your transom.*Quality - all the components are either aluminum or plastic. Depends appear to be galvanized so we'll see how they hold up over time in saltwater but so far everything is holding up great. All the components seem high quality and well made.*Adjustable - The arms the wheels are mounted to have holes in several positions so you can adjust them up or down to get a height that works well.*Hardware Included - All the hardware you need to mount these to your transom is included.****************************************************DISLIKES*Install Instructions - though these work great the installation instructions left a little bit to be desired. All you get is a small insert in the next book with different mounting pictures. It's simple enough to figure out but I feel like they could have done a little bit better here.****************************************************Overall I'm very happy with these transom wheels and I would definitely recommend them.
Randy Lewis
Reviewed in the United States on May 12, 2023
I inflated the tires to 20 PSI as per the instruction, but one tire had a tube with a hole in it, Try finding a replacement tube in that size. Now I have a one wheeled boat launcher, which means I have a useless product
scott a guthrie
Reviewed in the United States on March 31, 2023
This is a well-made product. The wheels are quite solid and the aluminum arms are robustly constructed. I am going to use as part of a system to help launch my canoe, so I will need to adapt the kit a bit. I took away one star because two plastic washers for one of the wheels were missing. These are very inexpensive items, but it is a sign that quality control is not where it should be and it is inconvenient to have to go and buy more at the hardware store.
Casey Murnane
Reviewed in the United States on December 9, 2023
My husband had an easy time mounting these on his Jonboat and loves how it it makes to get his boat around.
Chris B
Reviewed in the United States on April 22, 2023
ACTIVE GIFT Boat Launching Wheels Set Boat Transom Launching 12"/15" WheelThese look sturdy enough and we got to finally try them out this past weekend on the lake. They held up and were easy to install and put up and down. Strong and durable, easy to use.
JC3
Reviewed in the United States on April 20, 2023
These Boat Launching Wheels Set Boat Transom Launching 12"/15" Wheels will fit the transom of my modified raft that will make it easier for me to launch. when trying to get to my favorite fishing hole. These aluminum support arms are solid and seem well constructed, The tires have good grips and seem strong to glide over any surface, terrain or grassy area with ease. I plan on adding these to the transom of my modified 12ft inflatable once fully inflated and then loaded. these wheels and strong support will give me the ease of making moving my inflatable mush easier not having a trailer. The seem to lock in place and stay in place when tilted up unlocked in place and to drop down for use when unlocked. These are a really good price and can have multiple uses given the strength of the wheels, and workmanship. for me these Active Gift Boat Launching Wheel Set Boat, for Transom, Launching 12"/15" Wheel. This for me is a 5-Star review the Active Gift Boat Launching Wheels Set Boat Transom Launching 12"/15" Wheel are perfect to fit my Modified Boat Transom to complete my modified inflatable boat project.
Fernham
Reviewed in the United States on April 17, 2023
Nice quality, well constructed aluminum supports and hardware. The wheels are thick, heavy duty plastic with tires large enough to handle moderate terrain. I think these would work extremely well on a kayak. I plan on bolting these to plywood then clamping them them to the back of a small row boat. This will allow easy transport to a boat landing without the use of a trailer.The pin positioning on the legs allows for different angles of support or outright removal of the wheels when you don't want them attached. These could also work for a variety of applications, not necessarily just for boats; movable chicken coop, vegetable cart, etc.Very nice product.
Recommended Products
$1,199.99
$ 99 .00 $99.00