Your cart is empty.
Your cart is empty.Spawn
Reviewed in Canada on May 4, 2025
Super
Mark
Reviewed in the United States on May 19, 2025
It may have taken me twice to do this solidlyLooks good initially but easily breaks if not mounted securely. There is a little piece of U shaped plastic that connects the actual handle to the underside that screws into the door.This will take too much of the load of the door pulling if the handle is not glued/mounted/fully secured and break.Go to your workbench with your handles and some wax paper.If you do a basic install the double-sided tape on the handle doesn't stay stuck so I recommend you get a good super glue/Auto trim glue to mount it properly. Not gorilla glue!Take a fast setting glue, I used JB Weld super weld. With some kind of plastic or metal file stick thing carefully peel the mounting tape off the handle without pulling too hard and stretching it out. Put the tape on on a piece of wax paper so you do not lose it.Now take a moment to fit the tape-less handle on the car door and look underneath to see how the screw will line up underneath.It's really hard to get the screw centered while you're trying to hold it on there with glue setting and stretching your head to look under it or to thread it blind by hand without contorting yourself under.A tapeless handle is also a good time to see how you want to press and hold it while the glue is setting in the next stepSo back to the work bench. Put your super glue on the underside of the handle and carefully stick the tape it back to the handle. Let that set and dry for 10-15 mins or so not a full day. Now you can put super glue on the other side of the tape which will be the part that seats onto the door.Don't think you can discard the tape and super glue the handle without it. You want to leave the tape on there because it gives a good solid fit and it won't wobble or feel loose when it's on there. Without the tape strip there's too much play between the door and this handle.Once you start holding it on the door, make sure the mounting screw lines up by turning a few turns but don't tighten fully. You may need to stand there for 5 minutes holding it in the perfect position. Once set for a few mins you can tighten the screw mount.Let dry a couple hours or overnight. Do not try the handle opening and shutting right away let the glue dry possibly until the next morning.Only then is it beautiful
John
Reviewed in the United States on February 23, 2025
Been on the car a month. Already broke. The double sided tape they give is weak. Plastic handle pulled away from the tape then sheared at the small edge due to the unit only tying in with one screw at the far corner. Poor design. Junk. Should issue a refund.
Cody Asche
Reviewed in the United States on February 1, 2025
These handles look great and were a pretty simple install. It definitely cut down on questions I got about how to open the doors (there’s a button, what do you usually do with buttons?) Unfortunately, they’ve been on my car less than a week and today when I opened one of the doors for probably the first time since they were installed, the handle snapped right off. The screw, and a bit of the plastic at connection was still on the car, and the handle was in my hand…a foot away from the door. Clearly the adhesive didn’t do much, and the construction is less than impressive. Hopefully I can find something similar, but better.
Big Walt
Reviewed in the United States on August 27, 2024
The media could not be loaded.
W. Craigmiles
Reviewed in the United States on February 10, 2024
I had high hopes. Easy installation and it looked like OEM. Let the car sit in the garage a couple of days and upon use, one of the handles snapped off. The tape just isn't strong enough. I know the site was prepared well as I have alcohol swabs around for other projects I do. I ensured the area was dry, and even so, it broke on first use.
JAMES R HAINES
Reviewed in the United States on December 10, 2024
It’s plastic and very cheap. It worked for a while and then somebody pulled on the handle. It broke off and pulled the molding off with it. I don’t know what this will cost me for a replacement. I would highly not recommend it. Sorry to say they need to be metal Like the front handles. This does not allow me to take a picture.
giovanni herrera
Reviewed in the United States on October 9, 2024
Ya this isn't it I was ignoring the negative reviews and they are all correct the tape they included is crap so get a strong double sided tape . Even when you get better tape the product is so cheap and flimsy it feels like it's gonna break everytime you open the door. So it's mostly for looks and not actually use
M
Reviewed in Canada on April 29, 2024
Horrible quality! They broke easily shortly after installation and chipped paint on new car on both doors!!!
Customer
Reviewed in Canada on October 3, 2023
One of the handles had plastic covering on the sticky side removed. The rest of the handle is full of finger prints and some sticky substance. It is obviously been used. I am returning it.
Just Bueno
Reviewed in the United States on June 25, 2022
Reached out to the seller and was sent replacement 3m; I highly advise doing this. Plus seller sent adhesive promoter which really helped with curing. The door handles looks stock and no more finger prints!
Recommended Products