Your cart is empty.
Your cart is empty. Water Heater Thermal Cutoff is made of special metal, designed for your mobile home water heater, this auto spare kit provides a reliable fuse that keeps the RV water heater in top condition and effectively provides you with hot water.
Replacement part Atwood 93866 not only work for the electronic household water heater,it also work well during the journey.
Electronic water heater models compatibility: Fit for GCH6-4E, GCH6-6E, GCH6-7E, GC6A-7E, GH6-6E, GH6-7E, GH6-8E, G6A-6E, G6A-7E, G6A-8E, GCH6A-7E, GCH6A-8E, GCG6A-9E, GC6AA-7E, GC6AA-8E, GC6AA-9E, GCH10A-2E, GCH10A-3E, GC10A-2E, GC10A-3E, G10-1E, GH10-1E, G610-3E, GH610-3E, G10-2E, G10-3E, GC10-1E, GC10-2E, GH10-2E, GH10-3E, G6A-2E, GH6-3E, G6A-3E, GH6-3E, GH6-4E, G6A-4E, GCH6A-10E, GC6AA-10E, GC10A-4E, GCH10A-4E, XT Series.
Note: The mention of brand names and any related models above is only for purposes of demonstrating compatibility. Not all applicable models are compatible.
2-Prong Spark and Sensor Electrode Replacement: Fit for GCH6-4E, GCH6-6E, GCH6-7E, GCH6A-10E, GC6AA-10E, GC6A-7E, GH6-3E, GH6-3E, GH6-4E, GH6-6E, GH6-7E, GH6-8E, G6A-2E, G6A-3E, G6A-4E,G6A-8P,G6A-6E, G6A-7E, G6A-8E, GCH6A-7E, GCH6A-8E, GCH6A-9E, GC6AA-7E, GC6AA-8E, GC6AA-9E, GCH10A-2E, GCH10A-3E, GC10A-2E, GC10A-3E, G10-1E, GH10-1E, G610-3E,GH610-3E, G10-2E, G10-3E, GC10-1E, GC10-2E, GH10-2E, GH10-3E, GC10A-4E, GCH10A-4E, XT 6 and 10 gallon spark ignition models.
High Quality:The RV water heater replacement parts made from high quality materials.There are 125V 16A 82C ECO and 60C T-stat Assembly; The assembly is an emergency cutoff to ensure water temperature does not rise above 140 degrees Fahrenheit (about 60°C).
Fit for GCH6-4E, GCH6-6E, GCH6-7E, GC6A-7E, GH6-6E, GH6-7E, GH6-8E, G6A-6E, G6A-7E, G6A-8E, GCH6A-7E, GCH6A-8E, GCG6A-9E, GC6AA-7E, GC6AA-8E, GC6AA-9E, GCH10A-2E, GCH10A-3E, GH10-1E, G610-3E, GH610-3E, G10-2E, G10-3E, GC10-1E, GC10-2E, GH10-2E, GH10-3E, G6A-3E, GH6-3E, GH6-4E, G6A-4E, GCH6A-10E, GC6AA-10A, GC10A-4E, GCH10A-4E, GLM 21140, Mallory 9-72153, Mercruiser 45518A2, 45518A3 and 45518A1.
1. Turn Off Water heater switch
2. Remove valve from Left-hand ECO terminal-A
3. Note the position of the thermal cut-off-B
4. Remove brown incoming power wire-C from thermal cut-of
5. Remove and discard thermal cut-off-B from thermostat-F
6. Remove the air shutter D and slide the air shutter right
7. Run a flexible wire brush through the burner tube-D & E Until it is visible at the end of the burner tube
8. When you are sure the burner tube is completely clean,return the air shutter to its original position
INSTALLATION STEPS: 1.Turn switch to OFF position. 2.Discount brown and red wires from thermostat and ECO terminal connections on front of water heater. 3.Peel off black foam cover. 4.Remove washer, spring and thermostat from behind metal tabs on water heater combustion pan. 5.Paying close attention to cleaning the matting surfaces
