Your cart is empty.
Your cart is empty.
Specification
Model: W-0.9/12.5
Color: Blue
Martial: Cast Iron, Aluminum
Process: Polishing, Plastering, Painting
Driving Mode: Pneumatic
Compression Level: Secondary Compression
Motor Horsepower: 10 HP
Power: 7.5kw
Air Flow Capacity: 0.34m³/min
Max. Discharge Pressure: 175psi
Cylinder Diameter: 90x2 + 65x1mm/3.54x0.08+2.56x0.04 in
Pipe Interface: M33x1.5 mm
Installation Hole Distance: 252x170mm/9.92x6.69in
Main Wheel Diameter: 350mm /13.78in
Base Size(LxW): 25.2x17cm/9.92x6.69in
Product Size(LxW): 52x43.5cm/20.47x17.12in
Net Weight: 32.5kg/71.65 lbs
Gross Weight: 35kg/77.16 lbs
Notes
1.Please tighten the screws(not included), including the base and pulley screws. After installing the screws, please tighten the belt. If the belt is loose, please move the motor. After tightening the screws, please reinstall the belt.
2.Please note that the rotation direction of the pump head is clockwise. If it is reversed, please adjust it in time.
3.Please note that it should match the motor power.
4.Please note that the head and motor pulley must be kept in a straight line to avoid bearing displacement.
5.Please note that before using a new machine, you must add oil first. Change the oil for half a month for the first time, one and a half months for the second time, and change the oil for the next four to five months. Pay attention to observation at ordinary times.
6.Please replace the air filter regularly. Under normal circumstances, it must be replaced within two to three months, and if the environment is bad, it must be replaced within one month.
Kyleen Hinojos
Reviewed in the United States on May 13, 2025
This 10HP air compressor pump head is a beast! I installed it on my shop compressor as an upgrade, and the performance is outstanding
Recommended Products
