Your cart is empty.
Your cart is empty. ♥Instructions:
1. Insert the ends of the signal cable and transmission cable into the duct until the signal cable cannot go any further. At this time, the position of the probe is the blocking position.
2. Turn on the power switch of the transmitter, and the green indicator light will be on.
3. Turn on the power switch of the receiver, and use the hand-held signal receiver to detect the general direction of the buried pipeline. If you get close to the inside of the pipe, the receiver's earpiece will hum. The loudest part is the choke point. Make a mark and pull out the signal wire. It can be dealt with by digging the ground again.
4. After a long period of continuous use, the green light of the product will start to flash, indicating that the remaining power can be used for about half an hour. Please pay attention to charging in time.
♥Specifications:
Name: Pipeline Blockage Locator Kit
material: plastic
Color: red+black
Transmitter Specifications:
Scope of application: PVC pipe, plastic pipe, cement pipe, iron pipe, metal pipe
Working frequency: 300Hz
Working hours: 10H
Working temperature: 0-40℃
Battery: 3.7 V, 2600 mAh battery (included)
Receiver Specifications:
Distance range: 0-0.6 m (metal pipe); 0-0.15m (non-metal pipe)
Sensitivity Adjustment: Yes
Working frequency: 300Hz
Working hours: 20H
Battery: 3.7V 1400mAh rechargeable battery (included)
Item Dimensions:
Receiver: 360*65*40mm
Transmitter: 360*300*45mm
♥Packing list:
1 * Transmitter host (including lithium battery)
1 * receiver (with lithium battery)
1 * Double-ended charging cable
1 * earphone
8 * Transmitter probe accessories
1*502 glue
1 * English instruction manual
